Tel: +86 572 2265 111
Fax: +86 572 2260 487
Mob: +86 135 8721 5326
Email: [email protected]
Add: #365, Huyan Rd, Huzhou, Zhejiang P.R China
As the weather gets colder and colder, many places often use equipment such as fireplaces for heating. There are many types of fireplaces in life. Among them is a device called an alcohol fireplace, which is loved by many people. So how do we install this fireplace correctly?
1. Place the bottom plate of the alcohol fireplace at the position to be installed. The front side of the bottom plate has auxiliary installation lines (workers will pre-install before the fireplace leaves the factory, marking auxiliary lines to facilitate customers to install by themselves). National rigid indicators.
2, Put the thigh on the bottom plate, and align with the auxiliary installation line. Note: The position of the thigh should be aligned with the installation line of the bottom plate. After the thigh is placed, someone should hold it to avoid collapse.
3. Install the lower leg (one left and right of the cylindrical shape). Note: The position of the lower leg should be aligned with the installation line of the bottom plate. After the lower leg is placed, someone should hold it to avoid collapse.
4. Place the hanging plate. Note: The position of the hanging plate should be aligned with the position of the lower leg. To help the fireplace.
5. Adhere the fireplace mantel from the back. You can use thick cardboard to dig out the good Hercules marble glue and coagulant.
6. Put the side panel. The principle of the furnace mouth plate and the installation of the lower leg and the cover plate is the same. Place the cover.
The above is how to properly install the equipment such as the alcohol fireplace. I believe that it can greatly help everyone to use this equipment in life.